DeLorme Earthmate PN-20 - Manual (Page 57)

56
arrow keypad to highlight Current Position and press ENTER. Use the arrow keypad to
highlight Remove and then press ENTER.
5. Use the arrow keypad to highlight the Calculation Method drop-down list and press ENTER.
Then, highlight Road or Direct and press ENTER.
6. Highlight the Navigate button and press ENTER to calculate the route. If the calculation is
successful, the route is highlighted on the Map Page.
To View a Route
1. From the Routes Page, use the arrow keypad to highlight the route you want to view.
2. Press ENTER.
3. Use the arrow keypad to highlight View and press ENTER. The route displays on the Map
Page and the map is in pan mode.
4. To stop displaying the map, press QUIT to return to the Route Details page. The View button
has changed to Hide. Highlight Hide and press ENTER.
OR
From any default page (except the Satellite Page), press MENU, highlight Hide Route, and
then press ENTER.
To Simulate a Route
You can preview a route on the map using the Simulate Navigation feature. The route is highlighted on
the map and the device beeps at each applicable turn.
1. From the Routes Page, use the arrow keypad to highlight the route that you want to simulate
and press ENTER.
2. Press MENU, highlight the Simulate Navigation option, and then press ENTER. The mes-
sage, “Simulate Navigation will turn off Track Recording mode” displays. Highlight OK and
press ENTER. The cursor goes into simulate mode and plays the route on the map.
3. To end simulation, press MENU, highlight the Stop Simulation option, and press ENTER.
To Get Back on Track When Off Course
1. Ensure you are navigating against a route.
2. Press MENU, highlight the Back on Track option, and press ENTER. The route recalculates
based on your current position and adds that location to the route itinerary.
Tip: To exit Navigation mode,
press MENU, use the arrow
keypad to highlight Stop Navi-
gating , and then press ENTER.
Road route with two points