HuddleCamHD 18x - Manual (Page 10)

Ver 1.2 1/26/15
OSD MENU……………………………………………………………………………………………..
On Screen Display Menu - Use the OSD menu to access and change the
camera’s settings.
Note: You cannot manually move the camera (pan/tilt) when the OSD menu is
visible on the screen.
The Dome OSD Menu is as follows:
•
Pan Speed Default Value: 20
Set speed of Pan motor - Range = 1 - 63
•
Tilt Speed Default Value: 20
Set speed of Pan motor - Range = 1 – 63
•
Scan Speed (Auto Pan Mode) Default Value: 6
Set speed of boundary scan - Range = 1 – 63
•
Tour Path (uses presets) Default Value: 1
Select desired tour path - Range = 1 – 4
•
Tour Dwell Default Value: 5
Set duration to dwell on each preset - Range = 1 – 60
•
Proportion Default Value: On
Set Proportion - Range = On – Off
•
Auto Rev Default Value: P
Set camera mounting orientation – N for inverted ceiling mount
•
Frame Default Value: 60Hz
Set Refresh Rate - Range = 50Hz or 60 Hz