Hybrid Audio Technologies Legatia SE Carbon - Manual (Page 12)

Legatia SE Carbon User’s Manual ©Hybrid Audio Technologies Page 12 of 30
Tinsel Leads
The tinsel leads for the L4SE Carbon are terminated on one side of the voice coil. The tinsel leads
are stitched into the spider and bonded directly to the former and brought out to the terminals, which
completely eliminates tinsel lead slap and does not compromise the structural integrity of the cone.
Terminals
The Legatia L4SE Carbon comes equipped with heavy-duty nickel-plated spring-loaded push
terminals for both positive and negative, which is an enhancement over the L4 model. The terminals
optimize contact, and give the end user flexibility in tinned wire or binding post terminations.
Summary
The Legatia L4SE Carbon is the world’s finest multi-purpose super high-end small-format midbass
driver. Mechanical and electrical parameters are amenable to a variety of different installations and
speaker locations. This driver is intended to be used in an infinite baffle configuration; a simple, solid
baffle, solidly attached to the car’s chassis with available airspace at the rear of the baffle is all that is
required for optimum operation. The size of the L4SE Carbon allows it to be mounted in typical “4-
inch” midrange locations within a vehicle, especially in those circumstances which require extremely
shallow depth, or in custom locations at the discretion of the end-user, as long as there is adequate
airspace behind the driver to allow it to maintain proper damping and acoustic suspension.
At home in virtually any arrangement, the L4SE Carbon is Hybrid Audio Technologies Legatia SE
Carbon high-end small-format midbass offering, boasting exceptional performance and a design
philosophy that goes hand in hand with true high-fidelity playback.