Maintenance – Hyundai 2012 Elantra User Manual

Page 307

Advertising
background image

7 19

Maintenance

Air cleaner filter

A Genuine HYUNDAI air cleaner filter is
recommended when the filter is
replaced.

Spark plugs

Make sure to install new spark plugs of
the correct heat range.

Cooling system

Check cooling system components, such
as radiator, coolant reservoir, hoses and
connections for leakage and damage.
Replace any damaged parts.

Coolant

The coolant should be changed at the
intervals specified in the maintenance
schedule.

Automatic transaxle fluid
(if equipped)

Automatic transaxle fluid should not be
checked under normal usage conditions.
But in severe conditions, the fluid should
be changed at an authorized HYUNDAI
dealer in accordance to the scheduled
maintenance at the beginning of this
chapter.

NOTICE

Automatic transaxle fluid color is basi-
cally red.
As the vehicle is driven, the automatic
transaxle fluid will begin to look darker.
This is a normal condition and you
should not judge the need to replace the
fluid based upon the changed color.

Manual transaxle fluid
(if equipped)

Inspect the manual transaxle fluid
according to the maintenance schedule.

Brake hoses and lines

Visually check for proper installation,
chafing, cracks, deterioration and any
leakage. Replace any deteriorated or
damaged parts immediately.

Brake/clutch fluid

Check brake fluid level in the brake fluid
reservoir. The level should be between
“MIN” and “MAX” marks on the side of
the reservoir. Use only hydraulic brake
fluid conforming to DOT 3 or DOT 4
specification.

CAUTION

The use of a non-specified fluid
could result in transaxle malfunc-
tion and failure.
Use only specified automatic
transaxle fluid.

(Refer to

“Recommended lubricants and
capacities” in section 8.)

Advertising
This manual is related to the following products: