IBASE MI950 - Manual (Page 37)

BIOS SETUP
MI950 User’s Manual 33
Power Management Setup
Phoenix - AwardBIOS CMOS Setup Utility
Power Management Setup
PCI Express PM Function Press Enter ITEM HELP
ACPI Function Enabled Menu Level >
ACPI Suspend
Run VGABIOS if S3 Resume
Power Management
S1(POS)
Auto
User Define
Video Off Method DPMS
Video Off In Suspend Yes
Suspend Type Stop Grant
Modem Use IRQ 3
Suspend Mode Disabled
HDD Power Down Disabled
Soft-Off by PWR-BTTN
CPU THRM-Throttling
Wake-Up by PCI Card
Power On by Ring Instant-Off
50.0%
Disabled
Disabled
Resume by Alarm Disabled
Date (of Month) Alarm 0
Time (hh:mm:ss) Alarm 0 : 0 : 0
** Reload Global Timer Events **
Primary IDE 0 Disabled
Primary IDE 1 Disabled
Secondary IDE 0 Disabled
Secondary IDE 1 Disabled
FDD, COM, LPT Port Disabled
PCI PIRQ[A-D] #
HPET Support
HPET Mode Disabled
Enabled
32-bit mode
ACPI Function
Enable this function to support ACPI (Advance Configuration and
Power Interface).
ACPI Suspend
The default setting of the ACPI Suspend mode is S1(POS).
RUN VGABIOS if S3 Resume
The default setting of this field is Auto.