IBASE MB930 - Manual (Page 6)

INTRODUCTION
2 MB930-R User’s Manual
Product Description
The MB930 LGA 775 motherboard incorporates the Intel Q35 chipset
that can utilize a single LGA775 processor of up to 4.0GHz or higher
and supports FSB frequency of 800/1066MHz/1333MHz
(200MHz(800MT/s) and 266MHz(1066MT/s), 333MHz(1333MT/s)
HCLK respectively.
The Q35 chipset is designed for use with the Core.2 processor family,
including a faster 1333 MHz system bus. The integrated GMCH
component provides the CPU interface, DDR2 interface, Hub Interface
and PCI Express graphics interface.
Four DDR2 memory sockets support DDR2 667/800 SDRAM DIMM
modules of up to 8GB in capacity.
The board is designed with one Intel 82566DM PCI Express Gigabit
PHY (MB930RF-R/MB930F-R) or 82562V 10/100 PHY (MB930-R
only) LAN controllers. Serial-II ATA connectors offer 3Gb/s data
throughput speed - faster than the most advanced parallel ATA.
Expansion includes four PCI slots, one PCI Express x1 and one PCI
Express x16 and one ISA slot. Other advanced features include ten USB
2.0 ports, IrDA interface, digital I/O, four serial ports, watchdog timer
and audio function. Dimensions of the board are 12” by 9.5” in an ATX
form factor.
Remarks:
MB930-R/MB930F-R/MB930RF-R supports Intel
Supports the Intel
Core 2 Duo and Intel Core 2 Quad processors, and Intel Celeron
400(Conroe-L) Sequence processor.
MB930RF-R supports six Serial ATA connectors (with RAID function).
MB930-R / MB930F-R / MB930GF-R supports four Serial ATA
connectors only. MB930GF-R has the same specifications as
MB930F-R, except that its PCB thickness is 2.4mm).
The IDE connector on board does not support OS installation in hard
drive. A system hard drive connected to this IDE cannot be booted up to
OS.