IBASE IB903 - Manual (Page 10)

INSTALLATIONS
6 IB903F User’s Manual
Installing the Memory
The IB903F board supports one DDR3 memory socket for a maximum
total memory of 8GB DDR3 memory type.
Installing and Removing Memory Modules
To install the DDR3 modules, locate the memory slot on the board and
perform the following steps:
1. Hold the DDR3 module so that the key of the DDR3 module aligned
with that on the memory slot.
2. Gently push the DDR3 module in an upright position until the clips
of the slot close to hold the DDR3 module in place when the DDR3
module touches the bottom of the slot.
3. To remove the DDR3 module, press the clips with both hands.