IBASE CSB200-888 - Manual (Page 11)

11
Mounting CSB200-888 to VESA mounting bracket
Using attached mounting bracket, you can install CSB200 on standard 75x75mm
VESA mounting devices. Ensure the installer uses at least four M4 length 6mm
maximum screws to secure the system on VESA mounting device.
Fasteners are not included with the unit, and must be supplied by the installer. The
types of fasteners required are dependent on the type of device construction. To
assure proper fastener selection and installation, follow the fastener manufacturer’s
recommendations.
Mounting procedure:
- Using four embedded M3 flat head screws to secure the mounting
bracket on bottom of CSB200-888.
- Place CSB200-888 with mounting bracket on VESA75 device noting the
alignment, and then secure the system with four M4 screws.