ilve KHVI60TC - Manual (Page 7)

7
Once the heater is selected, the power level can be selected by touching the [-][+] keys. In
each increase/ decrease a beep sounds and the corresponding display shows the new power
level.
With the heater at power level 0, the [-] key raises the cooking level to 9.
With the heater at power level 9, the [+] key raises the cooking level to Booster level a beep
sounds and the heater display shows “P” (see Booster Function).
Switching Off a Heater
Once the heater is selected, the heater can be switched off by touching the [-] and [+] keys
simultaneously. A beep sounds and the corresponding display shows “0”.
Booster Function
After a heater has been selected, touch the [+] key until level 9. To select the Fast Boil
function touch the [+] key. A beep sounds and the heater display shows “P”. The heater will
work at maximum power level for 10 minutes. After these 10 minutes a beep sounds and the
heater will return to level “9”.
Key lock
Touching the [KEYLOCK] key for 1 second, the key lock function is activated and deactivated.
If the LED associated to the key lock key is on, the keyboard is locked. The locking function
can be activated when the heaters are on or when the cook top is off. If the cook top is on, the
key lock function locks all the keys except the general [ON/OFF] key and the [KEYLOCK].
When the cook top is off, the key lock function locks all the keys, including the general
[ON/OFF] key. The key-lock is always activated at the start up of the control.
Power Management
The cooktop maximum power limit is 7200W. This power limit can be reduced by the user to
2800W, 3500W or
6000W.
Setting CookTop ECO Power Limit
The sequence to set a new Cooktop Power Limit is:
·During the first 30 seconds after plugging the appliance.
·The Touch has to be unlocked and all Heaters Off.
·Press at the same time front left and rear right heater selection keys.
·Once this is done, a beep sounds and the actual Cooktop Power Limit will be shown in the
heater displays .
For selecting a new Power Limit
·With the (+) and (-) keys, the Power Limit is increased. The selectable powers are: 2800W,
3500W, 6000W or 7200W. When the power is 7200W, if the [+] or [-] key is touched the
power changes to 2800W.
Sequence to finish recording the new Cooktop Power Limit
·Press at the same time front left and rear right heater selection keys
·Once this is done, new Cooktop Power Limit is recorded and there is a system reset.
To finish without recording changes:
·If during 60 seconds there is no action, changes are not recorded and there is a system
reset.
Power management for ECO Cooktop
For ECO power cooktops, each time the user tries to increase the power, the total power level
of the cooktop is calculated. If this total power level is greater than the cooktop power limit,
the power increase is not allowed. An error beep sounds and the heater display shows an ‘r’
for 3 seconds.