Setting up tv stations, Setup – Daewoo DLT-20J3T User Manual

Page 26

Advertising
background image



 





 

 





 

 





 

Auto Tuning

Access

Manual Tuning

Access

Setup Access

Edit

Access

Select Access Exit

Picture

Screen

Sound

Install

Function

DVB

Channel C

04

System Euro

Frequency 063.75

Name

– – – – –

Program 01

Store To

01

Select

0…9 Change

Fine Tune

Search

Exit

Picture

Screen

Sound

Install

Function

DVB

Picture

Screen

Sound

Install

Function

DVB

Select

Position

0…9 Change

Exit

Channel C

04

System Euro

Frequency 063.75

Name

B

– – – –

Program 01

Store To

01

Setting Up TV

Stations

Setup

The Setup menu shows you information as follows:
- Channel, System, Frequency, Station name, Program number and Store to PR number.

1. Searching for channels in the Setup menu.
• Press the “ PR “ buttons to select a program number

you want.

• Move to Setup in the Install menu.
• Search using real channel information (Channel eg.eg.

channel 38, System eg. PAL/SECAM and Program
eg. 2) with “ / “ buttons.

Search: Press and hold for more than 1second

the remote control “ / ” buttons to start up/down
manual tuning.

• Searching will stop automatically at the next channel

found (to stop tuning, press the remote control MENU
button).

• Also you can directly locate a program by entering the

data into the “Channel” or the “Frequency” function.

2. Fine tuning.
• Move to Setup in the Install menu.
• Move the cursor to Frequency by pressing “ / ” but-

tons.

• Adjust the fine tuning with the “ / ” buttons.

Note :
• If you are unable to get a good picture or sound because

of a poor broadcasting signal, adjustment of the fine tun-
ing might improve it.

3. Enter a station name.
• Move to Setup in the Install menu.
• Move the cursor to Name by pressing “

/

” but-

tons.

• You can enter a station name with the “

/

” but-

tons. Also you can by pressing the appropriate key
until the character you want appears on the screen.
For example, when you press number 1 key (

) on

the remote control repeatedly, the character shown
on the screen will change as ‚1 A B C 1.

Note : Only English is supported for naming the sta-

tion.

Advertising
This manual is related to the following products: