Daewoo DLP-3212 - Manual (Page 33)

33
Menu Operation
Time Setting
1. Select the Time Setting from the Feature
menu.
2. Press the VOL► button and the Time Setting
mode appears.
Setup the Clock, Wake up Time and Off Time.
1. Start to set up by pressing the VOL► button.
2. AM/PM, Hour and minute is set up if pressing
PR and ◄VOL► buttons in the - - - -:- - status.
3. For Wake up Time and Off Time, select
either function on or off.
4. Press the MENU button for exit.
CH
-- -- : --
10
Wake up Pr and Wake up Vol
1. Move to the Wake up Pr or Wake up Vol menu with the
▼PR▲ buttons.
2. Press the
◄VOL► buttons to adjust the PR or Volume you want.
Wake up Time : You can turn on the TV at desired time.
Off Time : You can turn off the TV at desired time.
Wake up Pr : You can set the PR number when the TV turns on automatically.
Wake up Vol : You can set the sound volume when the TV turns on automatically.
NOTE :
Even though you turn off the LCD unit with the remote control, the time setting will be saved.
However, if you turn off the main power from the LCD unit the time setting will be reset.
The “Current time” must be set up before setting up other time memories.
Sleep
By pressing the SLEEP button repeatedly, you can select one of the following settings:
Sleep off
Sleep 10 Sleep 20 Sleep 30 Sleep 60 Sleep 90 Sleep 120
Sleep off
The set will turn off after the time you select.
NOTE: If a broadcast signal is not present for about 30 minutes, the set will automatically
turn to stand-by mode.
Picture
Sound
Screen
Install
Features
Move Adjust Menu:Save
Time Setting
Clock
Wake up Time AM 12:00 Off
Off Time AM 12:00 Off
Wake up Pr Pr NO.: 01
Wake up Vol