Interlink Electronics Ring Sensor User Manual
Page 7
Advertising
www.interlinkelectronics.com
5
Ring Sensor
Integration Guide
Stiffener
Stiffener
Conductor
Substrate
Conductor
Substrate
Adhesive
Adhesive
4.2 Connection
Recommended Tail Connector:
JST 4-pin SMT connector (JST Part Number: 04FM-1.0SP-1.9-TF)
Interlink recommends the above connector, but any compatible connector may be used. Note:
Tail is two sided which requires a connector that has both upper and lower connections. Refer
to Figures 4 for sensor tail dimensions.
Figure 4: Top view of sensor tail. All dimensions are in millimeters.
Figure 5: End view of sensor tail.
Advertising