Specifications, Xpa series operation – Dual XPA4640 User Manual
Page 10
10
XPA SERIES
OPERATION
Specifications
CEA-2006 Power Standard Specifications
(reference: 14.4VDC, 20Hz~20kHz)
Power Output:
50 Watts RMS x 2 channels at 4 ohms and < 1% THD+N
Signal to noise ratio:
75dBA (reference: 1 watt into 4 ohms)
Additional power output:
75 Watts RMS x 2 channels at 2 ohms and < 1% THD+N
150 Watts RMS x 1 channel at 4 ohms (bridged) and < 1% THD+N
Dynamic power:
300 Watts at 4 ohms
Frequency response:
20Hz~20kHz (-3dB)
Maximum input signal:
6V
Minimum input signal:
200mV
Speaker output impedance:
2~8 ohms (stereo), 4~8 ohms (bridged)
Bass boost:
0~12dB @ 45Hz
Crossover range:
50~500Hz, 12dB/octave
Power supply:
11-16 VDC, negative ground
Fuse:
25 amp ATO
Amplifier dimensions:
8.9" x 2.13" x 9.17" (WxHxD)
(226 x 54 x 233 mm)
Typical installation dimensions:
11.5" x 3.25" x 9.17" (WxHxD)
(292 x 83 x 233 mm)
CEA-2006 Power Standard Specifications
(reference: 14.4VDC, 20Hz~20kHz)
Power Output:
50 Watts RMS x 4 channels at 4 ohms and < 1% THD+N
Signal to noise ratio:
72dBA (reference: 1 watt into 4 ohms)
Additional power output:
75 Watts RMS x 4 channels at 2 ohms and < 1% THD+N
150 Watts RMS x 2 channels at 4 ohms (bridged) and < 1% THD+N
Dynamic power:
600 Watts at 4 ohms
Frequency response:
20Hz~20kHz (-3dB)
Maximum input signal:
6V
Minimum input signal:
200mV
Speaker output impedance:
2~8 ohms (stereo), 4~8 ohms (bridged)
Bass boost:
0~12dB @ 45Hz
Crossover range:
50~500Hz, 12dB/octave
Power supply:
11-16 VDC, negative ground
Fuse:
25 amp ATO x 2
Amplifier dimensions:
13.69" x 2.13" x 9.17" (WxHxD)
(348 x 54 x 233 mm)
Typical installation dimensions:
16" x 3.25" x 9.17" (WxHxD)
(406 x 83 x 233 mm)
XPA2500
XPA4640