Jetway Computer NF9QU - Manual (Page 15)

10
(5) JBAT (3-pin): Clear CMOS Function Settings
2-3 Closed:Clear CMOS.
JBAT→Clear COMS
1-2 Closed: Normal;
1 3
1 3
(6)JP4 (2-pin): Security Measure Function Select
1-2 Closed: Disable Security Measures
in the Flash Descriptor(Override).
JP4
1 2
1-2 Open:Enable Security Measures
in the Flash Descriptor(Default);
1 2
(7)AT_MODE (2-pin): AT Mode Function Select
Pin 1-2 closed: AT_MODE function is enabled. In this case your computer will
automatically turns on after a sudden power failure when power supply resumes.