Jetway Computer NC9F - Manual (Page 32)

27
► Super IO Configuration
Serial Port
Use this item to enable or disable serial port.
-Device Settings
The current device setting for serial port will show on the screen. When serial port
function is set as [Disabled] this item will not appear.
-Change Settings
Use this item to select an optimal setting for super IO device.
CIR Controller
Use this item to enable or disable CIR controller.
-Device Settings
The current device setting for CIR controller will show on the screen.
CIR LED
The optional settings are: [Disabled]; [Enabled].When CIR LED is enabled, the
CTS of UART is disabled.
ERP Function
Use this item to enable or disable ERP function for this board. This item should be
set as [Disabled] if you wish to have active all Wake-up functions.
WatchDog Timer
WatchDog Timer Control
Use this item to enable or disable WatchDog Timer Control. When set as
[Enabled], the following sub-items shall appear:
WatchDog Timer Value
User can set a value in the range of 1 to 255.
WatchDog Timer Unit