Jetway Computer NF38QLB - Manual (Page 37)

32
Serial Port 1/2 Address
This item allows BIOS to select base addresses for serial port 1/2.
Select RS232/RS422/RS485
The optional settings are：[RS422];[RS232]; [RS485].
Mode Speed Select
The optional settings are:
[RS232=1Mbps,RS422/485=10Mbps];[RS232/422/485=250Kbps].
CIR Controller
The optional settings are: [Enabled]; [Disabled].
Watchdog Timer Control
This item is used to activate the watchdog function. The optional settings are:
When set as [Enabled], The following sub-items shall appear:
WatchDog Timer Val
User can type a number in the range of 4 to 255.
WatchDog Timer Unit
The optional settings are: [Sec.]; [Min.].
3-8 Power Management Setup
The Power Management Setup allows you to configure your system to most
effectively save energy saving while operating in a manner consistent with your own
style of computer use.