Jetway Computer NF36 - Manual (Page 37)

32
► Super I/O Configuration
CIR Controller
The optional settings are: [Disabled]; [Enabled].
Case Open Detect
To detect if the case has bee opened or not.The optional settings are: [Enabled];
[Disabled].
► PC Health Status
Press [Enter] to view hardware health status and make settings SmartFAN
Configuration.
► SmartFan Configuration
CPUFAN 1 SmartFan Mode
When set as [Enabled], the following sub-items shall appear:
CPUFAN1 Full Speed Temp
Use this item to set a degree for CPUFAN1 to run at full speed when above the
specific temperature.
CPUFAN1 Idle Temp
Use this item to set a degree for CPUFAN1 to idle speed when below this
temperature.
CPUFAN1 Stop Temp
Use this item to set a degree for CPUFAN1 to stop when below this temperature.
► Serial Port Configuration
► COM1 Port Configuration/COM2 Port Configuration/COM3 Port
Configuration
Press [Enter] to make settings for the following items: