Jetway Computer NU93 - Manual (Page 13)

8
JP1 (2-pin): Security Measure Function Select
1-2 Closed: Disable Security Measures
in the Flash Descriptor(Override).
JP1
1
1-2 Open:Enable Security Measures
in the Flash Descriptor(Default);
1
AT-MODE1 (2-pin): AT Mode Function Select
1-2 Closed：AT Mode Selected.
AT-MODE1
1-2 Open: ATX Mode Selected;
1
1
*Pin 1-2 closed: AT_MODE function is enabled. User needs to restart the system for
the settings to take effect. In this case your computer will automatically turns on when
power supply resumes.