Jetway Computer NAF93-Q77 User Manual

Page 29

Advertising
background image




25

S3 Video Repost
Use this item to enable or disable S3 video report.

Wakeup Function Settings

Press [Enter] to make settings for the following sub-items:
Wake System with Fixed Time
Use this item to enable or disable system wake on alarm event. When set as
[Enabled], system will wake on the hour/min/sec specified.
CIR Wakeup
Use this item to enable or disable CIR wakeup.
PS2 KB/MS Wakeup
Use this item to enable or disable PS2 KB/MS wakeup. This function is only
supported when ERP function is disabled.

PCI PME Wakeup
Use this item to enable or disable S3/S4/S5 PCI PME Wakeup. This function is
only supported when ERP function is disabled.
USB S3/S4 Wakeup
Use this item to enable or disable USB S3/S4 wakeup. This function is only
supported when ERP function is disabled.

Trusted Computing

Press [Enter] to enable or disable TPM support.

CPU Configuration

Press [Enter] to make settings for the following sub-items:
Hyper-Threading
The optional settings are: [Disabled]; [Enhanced].
Active Processor Cores
Use this item to select number of cores to enable in each processor package.
Limit CPUID Maximum
The optional settings are: [Disabled]; [Enhanced].This item should be set as
[Disabled] for Windows XP.
Execute Disable Bit
The optional settings are: [Disabled]; [Enhanced].
Intel Virtualization Technology
The optional settings: [Enabled]; [Disabled].
When set as [Enabled], a VHM can utilize the additional hardware capabilities
provided by Vanderpool Technology.
Hardware Prefetcher
Use this item to turn on/off the Mid Level Cache (L2) streamer prefetcher.
Adjacent Cache Line Prefetch
Use this item to turn on/off prefetching of adjacent cache lines.

SATA Configuration

Press [Enter] to make settings for the following sub-items:
SATA Controller(s)
The optional settings are: [Disabled]; [Enhanced].
SATA Mode Selection
This item has deferent settings for deferent motherboard.
For NAF93-Q77: The optional settings are: [IDE]; [AHCI]; [RAID].
For NAF93-B75: The optional settings are: [IDE]; [AHCI].

Advertising
This manual is related to the following products: