Jetway Computer NF81 - Manual (Page 30)

25
WatchDog Timer Value
User can set a value in the range of 0 to 255.
► H/W Monitor
Press [Enter] to view hardware health status. User can also make settings to the
smart fan mode.
CPUFAN1/SYSFAN1/SYSFAN2 Smart Mode
When set as [Enabled], the following sub-items shall appear:
CPUFAN1 (SYSFAN1 /SYSFAN2) Highest Speed Temp/ Idle Temp/ Second
Speed Setting/Idle Setting
Make settings to the above sub-items by typing in number in the specified range to
control working temperature of the board.
► Shutdown Temperature Configuration
Use this item to select system shutdown temperature.
The optional settings are: Disabled; 60C/140F; 65C/149F; 70C/158F; 75C/167F.
► Voltage Settings
Use this item select settings for DRAM voltage.