6-3 onboard super io function – Jetway Computer NC98 User Manual
Page 28
23
JMicron 36x ATA Controller
Use this item to select ATA Controller operate mode. The optional setting is Disabled;
IDE Mode; RAID Mode; AHCI Mode.
High Definition Audio
This item allows you to decide to auto /disable the chipset family to support HD Audio.
The optional settings are: Auto, Disabled.
USB 2.0 Operation Mode
The settings are: FullSpeed; HiSpeed. Use the item to configure the USB 2.0
controller in HiSpeed (480Mbps) or FullSpeed (12Mbps).
USB Keyboard/ Mouse/ Storage Legacy Support
Select enabled if your system contains a Universal Serial Bus (USB) controller and
you have a USB keyboard /mouse/storage device. The settings are: Enabled,
Disabled.
Emulation Type
If Auto, USB devices less then 530MB will be emulated as floppy and remaining as
hard device. Forced FDD option can be used to force a HDD formatted drive to boot
as FDD (Ex. ZIP Drive).
3-6-3 Onboard Super IO Function
Serial Port 1 Address
The optional settings are：Disabled, 3F8/IRQ4, 3E8/IRQ4, 2E8/IRQ3, 2F8/IRQ3.
This item allows BIOS to select Serial Port1 Base Addresses
.