Jetway Computer NC93 - Manual (Page 34)

29
In this item users can either select Enabled or Disabled to enable or disable Primary IDE 0;
Primary IDE 1;Secondary IDE 0; Secondary IDE 1; FDD, COM, LPT Port or PCI
PIRQ(A-D).
PCI Express PME Function
Press Enter to either set Enabled or Disabled the PCI Express PM Function.
3-9 PnP/PCI Configuration
Phoenix – AwardBIOS CMOS Setup Utility
PnP/PCI Configuration
Item Help
IRQ Resources Press Enter
PCI/ VGA Palette Snoop Disabled
**********PCI Express Relative Items*********
Maximum Payload Size 128
Menu Level >
↑↓→← Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Optimized Defaults F7:Standard Defaults
PCI/VGA Palette Snoop
This item is designed to overcome problems that can be caused by some non-standard VGA
cards. This board includes a built-in VGA system that does not require palette snooping so
you must leave this item disabled.
IRQ Resources
Names the interrupt request (IRQ) line assigned to the USB on your system. Activity of the
selected IRQ always awakens the system.