Jetway Computer NC73 - Manual (Page 36)

31
ACPI Suspend Type
Users can select the ACPI state used for system suspend. The optional settings are:
S1(POS); S3(STR).
Video Power Down Mode
The optional settings: Disabled; Standby.
Suspend Time out
Use this item to select the specified time for system to go into suspend.
Power Button Mode
Use this item to go into On/Off or Suspend when power button is pressed.
PWR State after PWR Failure
The optional settings are: Always Off; Always On; Former Status.
Notice!
„PWR Status after PWR Failure‟ is synchronic with „ERP Function‟.
User need to set
„ERP Function‟ item as [Disabled] for „PWR Status
after PWR Failure ‟ to show up.
ERP Function
The optional settings are: Enabled; Disabled. When set as [Disabled], the following
sub-items shall appear:
Wake-Up by PS/2 KB; Wake-Up by PS/2 Mouse;Wake-Up by PCI Card; Wake-Up
by Ring; Wake Up by LAN from S3-S5;Wake Up by USB from S4; Resume On
RTC Alarm.
User can set them as Enabled or Disable for to enable or disable respective functions.