Jetway Computer JBC381F39 - Manual (Page 36)

31
422/485=10Mbps].
► COM2/COM3/COM4 Port Configuration
Press [Enter] to make settings for the following sub-items:
Serial Port
Use this item to enable or disable serial port.
Change Settings
Use this item to select an optimal setting for super IO device.
► WatchDog Configuration
Press [Enter] to make settings for Watchdog Configuration:
Watchdog Configuration:
WatchDog Timer Control
Use this item to enable or disable WatchDog Timer Control. When set as
[Enabled], the following sub-items shall appear:
WatchDog Timer Val
User can set a value in the range of 4 to 255.
WatchDog Timer Unit
The optional settings are: [Second];[Minute].
► Shutdown Temperature Configuration
Use this item to select system shutdown temperature.
The optional settings are: [Disabled]; [70C/158F]; [75C/167F]; [80C/176F];
[85C/185F].
► Serial Port Consol Redirection
Press [Enter] to make settings for serial port redirection settings:
COM1/COM2/COM3/COM4
Console Redirection
The optional settings are: [Enabled]; [Disabled].
When set as [Enabled], user can make further settings in:
► Console Redirection Settings
Terminal Type
The optional settings are: [VT100]; [VT100+];[VT-UTF8];[ANSI].