JLCooper BTX Eclipse - Manual (Page 11)

11
Using the RS-422 Interface Card
Installing the RS-422 Interface
Connecting the Eclipse BTX is quite straightforward. The Eclipse
BTX with the RS-422 Interface connects to a RS-422 port.
1. Install the MCS-3000 Series RS-422 Interface in Slot 1.
2. Connect the included power supply to the Eclipse BTX.
3. Connect the Eclipse BTX to an RS-422 port.
Configuring the RS-422 Interface
To configure the MCS-3000 Series RS-422 Interface Card for use
with a computer based application:
1.
2.
3.
4.
Remove power from the Eclipse BTX.
Remove the MCS-3000 Series RS-422 Interface Card from
the Eclipse BTX.
Set the 5 jumpers found on the card to the “Computer”
position.
Insert the MCS-3000 Series RS-422 Interface Card into
Slot 1 of the Eclipse BTX.