Connecting – JLCooper ES-450SP USB User Manual
Page 6
Advertising
Connecting
Connecting the ES-450SP USB is straightforward. Simply connect
the ES-450SP USB to a free USB port on your computer. The ES-
450SP USB is powered from the USB port. The ES-450SP USB
should be plugged into a self powered hub.
Windows XP SP2 and later, Vista and Windows 7 include drivers
that allow the ES-450SP USB to appear as a virtual serial port.
Drivers for other operating systems can be obtained from:
To configure the ES-450SP USB to operate with a specific
software application, refer to the setup documentation for that
software application.
6
Advertising