Connecting – JLCooper ES-SloMo USB User Manual
Page 5
Advertising
Connecting
Connecting the ES-SloMo is straightforward. Simply connect the
ES-SloMo USB to a free USB port on your computer. The ES-
SloMo USB is powered from the USB port. The ES-SloMo USB d
should be plugged into a self powered hub.
Windows XP SP2 and later, Vista and Windows 7 include drivers
that allow the ES-SloMo USB to appear as a virtual serial port.
Drivers for other operating systems can be obtained from:
To configure the ES-SloMo USB to operate with a specific
software application, refer to the setup documentation for that
software application.
5
Advertising