JLCooper MCS2 MIDI - Manual (Page 8)

8
Track Enabling
The MCS
2
has the ability to record-enable up to 8 tracks.
Tracks one through four are enabled by holding down the Shift
key while pressing either
Fast Forward (track 1)
Stop
(track 2)
Play (track 3)
Record (track 4)
Tracks five through eight are enabled by holding down the
Option key while pressing either
Fast Forward (track 5)
Stop
(track 6)
Play (track 7)
Record (track 8)
Remember that the MCS
2
has no input from the device being
controlled, so it has no knowledge of any track enabling done
on the front panel of the machine itself. Nor does it know the
status of the machine when the MCS
2
is first powered on. The
MCS
2
powers-up operating under the assumption that all tracks
are not enabled.
Jog / Shuttle Wheel
The wheel sends both MMC and MIDI Controller commands.
The Wheel and MIDI Controller Commands
The MIDI Controller commands are the same commands as
those sent by the JLCooper CS-10
2
Control Station. These
commands are recognized by many software based digital
audio workstations.
Look in the documentation of the system that you are
controlling. If CS-10 or CS-10
2
support is mentioned, then the
MCS
2
will also behave in the same manner. The Jog button and
LED have no effect on the controller commands sent.