Dimplex TDS8515 - Manual (Page 13)

13
Caution should be taken
as the top mounting
brackets may scratch the
finish.
4. Slide filter out of air filter
bracket.
5. Reassemble in reverse order
as above.
Glass Cleaning
The glass is cleaned in the
factory during the assembly
operation. During shipment,
installation, handling, etc., the
clear door may collect dust
particles; these can be removed
by dusting lightly with a clean dry
cloth.
To remove fingerprints or other marks, the clear door can be cleaned
with a damp cloth. The clear door should be completely dried with a
lint free cloth to prevent water spots.
CAUTION: Do not use abrasive cleaners on glass surface or spray
liquids directly onto any surface.
Stove Surface Cleaning
Use a cloth dampened with warm water only to clean painted surfaces
of the electric stove. Do not use abrasive cleaners.
Filter
Figure 7