Dual XDMA6355 - Manual (Page 25)

25
Bluetooth
®
Operation
XDMA6355 OPERATION
When the BTM60 Bluetooth interface module (sold separately) is connected, the XDMA6355
supports A2DP wireless streaming audio from your Bluetooth mobile device directly to
your head unit. You can also control your music from the front panel of the head unit using
AVRCP (audio video remote control profile).
To stream music to your head unit, your mobile device must support the following criteria:
• A2DP profile to stream audio
• AVRCP profile to control your music. Check the owner's manual or manufacturer
of your device for compatibility.
• Streaming audio must be enabled from your mobile device. This option will vary
depending on the device. Example: "wireless stereo."
• Disabling AV MODE must be done from your mobile device.
After enabling streaming audio from a compatible mobile device, the head unit will display
"AV MODE." The following functions can be used to control music:
• The ll button will skip to the next available audio track.
• The
nn
button will skip to the previous audio track.
• The
l
/ II button will toggle between play and pause during playback.
• The MUTE button will stop the audio playback.
NOTE: If you are experiencing problems with these functions, try playing music from the
mobile device. On some mobile devices, it may be necessary to control the music from the
device.
Bluetooth Reset
Resetting the Bluetooth module will remove the list of paired phones and delete the list of
dialed, received, and missed calls from memory.
To reset the BTM60 Bluetooth module, press MODE to enter Bluetooth standby mode.
Press
to disconnect your mobile device, if it is connected. The unit will display DUAL_
BTM60. Press and hold MODE for 3 seconds to reset the BTM60 module.
Bluetooth Streaming Audio Operation
(AV MODE)