Kemppi GT02S User Manual
Page 14
EN
meter display (not available in promig applications)
The meter display provides essential welding data indicators. Depending on the MIG/MAG
process selected, Voltage, Amperage, Wire feed speed, Plate thickness and Polarity will be
indicated. Power and arc length adjustment can be made, prior to, and during welding via the
potentiometers housed under the SuperSnake cabinet door. Post weld data is retained in the
display for approximately 30 seconds after welding stops, providing that no additional control
signals are received during this time.
m/min
A
V
1.
2.
3.
1.
Voltage
2.
Welding current
3.
Wire feed speed
water cooled models
Water cooled SuperSnake models allow connection to the cooling fluid supply for liquid
cooled guns. Snap connectors fitted at either end of SuperSnake unit are marked RED and
BLUE, allowing simple, fast and convenient connection. Ensure the cooling fluid circuit is
correctly connected.
12
SuperSnake GT02S, GT02SW / © Kemppi O
y / 1110