Kleenmaid BSV360 - Manual (Page 7)

7
WHAT TO DO POSSIBLE CAUSES YOU NOTICE THAT
The water level detector is flashing
even though the tank is full
No lights come on
Water or steam is leaking out of
the door during cooking
Intermittent "humming" during
steam cooking
l Tank is incorrectly positioned
l The detection system is faulty
- Check that the tank is fully
pushed in
- Call your After Sales Service
l The oven has no power supply
l The electronic card is not wor-
king
- Check the power supply
(mains fuse)
- Call your After Sales Servi-
ce.
- Nothing, the oven is opera-
ting normally
l The water pump is operating
If you cannot solve the problem you should always
contact your After Sales Service immediately.
l The door is not closed proper-
ly
l The door seal is faulty
- Check the tank is fully pu-
shed in
- Call your After Sales Service
6) PROBLEMS?