Kleenmaid GCT6020 - Manual (Page 12)

8
INSTRUCTIONS FOR THE INSTALLER
MAINTENANCE
Maintenance Schedule
No regular maintenance is required for the
hotplates except cleaning.
The appliance should be checked by an
authorised person every 7 years to ensure the
safe operation of the appliance. This is not
covered by warranty.
Replacing the power supply cable
If the power supply cable should be replaced,
it is necessary to use a cable with a section of
3x0.75mm 2 , type H05VV-F or H05RR-F, complying
with the regulations in force.
The connection to the terminal board must be
effected as shown in fig.9 - 9/A:
(phase)
(neutral)
brown cable L
blue cable N
green-yellow cable (ground)