Kleenmaid RFS140 - Manual (Page 6)

6
Placing and Installation
Choosing the Right Place
Place the appliance in a dry and regularly ventilated room. Allowed ambient
temperature depends on the model (class) of the appliance and is stated on
the rating plate of the appliance.
Class Ambient temparature
SN (sub-normal) from + 10°C to + 32°C
N (normal) from + 16°C to + 32°C
ST (sub-tropical) from + 18°C to + 38°C
T (tropical) from + 18°C to + 43°C
Never place the appliance near heat emitting devices (e.g. cooker, radiator,
water heater or similar devices) and do not expose it to direct sunlight.
Placing the Appliance
•
Place the appliance firmly on a solid base.
Level it with the two adjustable feet, located on
the front.
•
The appliance with ventilation grid may be
placed close to the wall. The grid enables
sufficient air circulation, required for adequate
ventilation of the rear wall.
•
Two spacers attached to the appliance must
be fitted onto the upper edge of the condenser,
thus preventing the appliance from being
installed too close to the wall. Spacers are
manufactured for all-purpose function
depending on the distance of the condenser
from the wall. Therefore turn spacers
correspondingly and fix them to the appliance.
Connection to Power Supply
Connect the appliance with the cable and plug to the power supply socket.
This supply outlet must be 240V and earthed.