Kleenmaid LWG74 Operating Instructions - Manual (Page 2)

2 39981
W395IE0A
p "’^ dp›^F’
IMPORTANT: Before using your new washer,
make sure the washer cord is plugged into a
240 Volt electrical outlet that has the proper
earthing and polarity. Make sure the washer
hoses are connected to the hot and cold water
taps, and that the taps are turned on. Be sure the
drain hose is not kinked and is inserted into a
drain. See the INSTALLATION
INSTRUCTIONS for details of proper washer
installation.
IMPORTANT: Prior to first wash, use an all
purpose cleaner or a detergent and water
solution and a damp cloth to remove shipping
dust from inside of washtub.
1. Get the clothes ready for
washing. Empty pockets and
cuffs. Sort items into
separate loads. Pretreat
stains and heavily soiled
areas.
2. Measure and add detergent
to the washtub.
3. Add clothes loosely into the
washtub.
4. Close the loading door.
5. Set WASH/RINSE temperatures.
NOTE: The washer will
provide a cold rinse in all
TEMPERATURE settings
except in positions marked
HOT wash WARM rinse or
WARM wash WARM rinse.
DO NOT use a warm rinse
with permanent press or
other synthetic fabrics. A
warm rinse can cause
wrinkling in some garments. Cold rinses will
save you money and energy and will help reduce
wrinkling in permanent press and synthetics.
The Energy Saver settings, marked with a
dot (•), show which temperature settings will
use the least energy.
6. Set LOAD SIZE
(WATER LEVEL)
control. Use RESET if
agitation has started and
more water is needed.
IMPORTANT: Holding the LOAD SIZE
(WATER LEVEL) control in the RESET
position can cause flooding of the washer.
7. Select the cycle according to the type of fabric
being washed. Push the timer knob in and turn
clockwise to the desired cycle and wash time.
8. Pull the timer knob out to start the water fill.
Agitation will begin when the water reaches the
level you selected.
The washer will stop (pause) shortly before the
wash and rinse spins. Do not turn the timer
through these pauses. They are part of the cycle.
z›apm’
Prewash
Use for heavily soiled or stained clothing. When the
PREWASH setting is selected, the washer will
automatically go through the SOAK/PREWASH
and the REGULAR cycle. First, add detergent into
the wash tub, then place the wash load into the tub.
Fill softener dispenser in agitator with liquid
detergent diluted with water.
IMPORTANT: Dispenser must be cleaned
before and after using detergent.
Extra Rinse
Use for heavy clothing such as denim, towels, etc.,
where an additional deep rinse may be desired.
When the EXTRA RINSE setting is selected, the
washer will automatically go through the
REGULAR cycle and a second deep RINSE cycle.
D305IE1A
W281IE0B
W318IE0C