Kleenmaid TX768A - Manual (Page 18)

Alternate emptying method
If, after an incident, you have to empty the
machine, proceed as follows (Diagram 17):
- open the door
➀
at the front of the
machine.
To do this:
• insert a screwdriver as indicated on the
diagram
• detach the door by pressing to the left
- pull on yellow plug
➁
to release the drain
spout.
- separate the plug from the spout
➂
and
allow the water to flow into a container
placed for the purpose (be careful of
the water temperature).
When emptying is complete, refit the spout
by following the above procedure in the
reverse order.
Diagram 17
➀
➁
➂
18
Routine maintenance