K-Patents DD-23 - Manual (Page 19)

15
5 Configuration
The K-Patents Divert control system is shipped fully calibrated by the manufacturer.
This chapter contains instructions on how to make 󰅮ine adjustments of the system.
5.1 Calibration lock
Parameter changes are possible only when the calibration lock is open. The calibra-
tion lock can be closed by a switch inside the control unit cover (see Figure 5.1). When
the lock is open, a red led is illuminated next to the lock switch. For safety reasons,
keep the calibration lock open only during parameter changes, done through the web
interface (see Chapter 8).
CALIBRATION LOCK
CALIBRATION
LOCK
Figure 5.1 Location of the calibration lock