Kussmaul Electronics 091-28HP User Manual
Page 2
Advertising
INTRODUCTION
The Air Eject is a specially designed pneumatic cylinder with an integral solenoid valve which,
when the vehicle is started, disconnects the air line connected to it. The Air Eject is supplied
with the following components:
1. Cylinder Assy
2. Check Valve
3. Gasket
4. Mounting Screws
5. Mating Female Connector
6. Bezel
INSTALLATION
HOLE TEMPLATE
Note: The 1 3/8" diameter hole is critical. If this hole is too
small it will prevent piston from striking Female connector.
Advertising