Kussmaul Electronics 091-127-12E-80 - Manual (Page 2)

INTRODUCTION
The AUTO CHARGE, ODY Charger, Model 091-127-12E-80-115 is a completely automatic
single channel battery charger designed specifically for periodic charging of ODYSSEY PC
Series Batteries and certain types of AGM Batteries (consult factory). Of rugged
construction, the charger is made to withstand the shock and vibration encountered in
vehicle mounted equipment. Utilizing components which meet international safety
standards makes this charger ideal for worldwide applications.
BATTERY CHARGER FEATURES
Completely automatic operation, charges battery on demand
Output Voltage regulated, eliminates overcharging battery
Output Voltage, temperature compensated (optional)
Output, current limited to protect charger from overloading
A 5-LED display indicating charge state and faults
Reverse polarity protection
INSTALLATION
The AUTO CHARGE ODY Charger should be installed in an area with adequate ventilation.
Mount the charger using the four holes provided in chassis.
Connect charger wiring directly to the battery for optimum charger performance.
Double check battery wiring. Verify that the battery voltage appears at the charger output
connections. (See Figure 3).