Denon PMA-2000AE - Manual (Page 15)

NOTE:
• Copying is not possible from TAPE-2/MD to TAPE-1/CD-R.
• This amplifier has a full memory back-up system. When
the power is turned on, INPUT SELECTOR knob are set to
the last mode set before the power was turned off.
2 Monitoring the recording
A recording in progress can be monitored if a tape deck with
three individual heads for recording and playback is used. A
tape deck in which a common head is used for both recording
and playback cannot be used to monitor recording. When a
recording is being made using TAPE-1/CD-R, selecting TAPE-
1/CD-R with the INPUT SELECTOR knob will engage the
RECORDING MONITOR and pemit a check of the recording
condition.
2 Copy from one tape to another
To copy from TAPE-1/CD-R to TAPE-2/MD, set the REC OUT
SELECTOR knob to “TAPE-1 1 2”.
1 Set the REC OUT SELECTOR knob to the program
source you wish to record.
2
Play back the program source.
Start recording.
3
• In the PMA-2000AE, the recording output signal and the
speaker (headphone) signal are output via separate circuits
so that knobs and switches related to the tone and volume
have no effect what ever on the sound that is recorded.
Also, since the recording function is selected by the REC
OUT SELECTOR switch , the free program source can be
played through the speakers (or headphones) even during
recording.
MEMO
Recording
10
ENGLISH
ENGLISH