Lacava llc 5 – Lacava 1540 User Manual
Page 5
Advertising
LACAVA LLC
5
8. Finish the wall around the plaster guard. Size hole to plaster guard (make sure valve is at proper depth).
9. Once surrounding wall is finished, remove the plaster guard.
10. Apply a bead of silicone sealant onto the back edge of the backplate and slide into place over the cartridge
body. Using a clean rag, wipe off any excess silicone.
11. Loosen the set screw on the control handle and place on the cartridge stem. Then tighten the set screw using the
provided Allen wrench and place the cover over the screw hole.
Advertising