Legrand EDF V-Trough - Manual (Page 2)

sPliCing straight seCtions and fittings
To splice straight sections of v-Trough use the fTEf. The fTEf has attachment hardware
included and should be used when splicing v-Trough straight sections or fittings.
sPliCing tees, reduCtions and level Changes
The fTus is a versatile splice that can be used to construct tees, reductions and elevation changes.
use with EZ bN 1/4 bolt/nut or bTRCC6x12.
attaChing to wall or floor suPPorts
securing tray to supports is easy. for attachment to the fAs u or Cs series support, use the fTfCL.
it simply snaps in place. Another option is the fThDCL Tray hold Down Clip. both allow a cover to be used.
Cover attaChment oPtions
Complete the security of your cables with covers. These cover sections can be cut to fit with a
reciprocating saw and simply snap on. for additional security, use the fTCfCL Cover fastening
Clip. This clip can be used in conjunction with splicing hardware to keep covers secure.
traPeze suPPorts
for trapeze mounting, two options are available: The fTCh Center hanger requires only a single threaded rod. The fTAs Trapeze
hanging Clip requires two 3/8" threaded rods, but allows cables to be side loaded. folding tabs secure tray to supports.
FTCH CENTER HANGER FTAS TRAPEzE HANGING CLIP
www.LEGRAND.us/cAbLofiL
20
www.LEGRAND.us/cAbLofiL
21
For detailed dimensions, see pages 22-23. For finish descriptions, see page 25.
iN
sT
ALLA
Tio
N
s
iN
sT
ALLA
Tio
N
s
v-TRouGh
iNsTALLATioNs
v-TRouGh
iNsTALLATioNs