Legrand CCBB Series Floor Boxes User Manual
Page 4
13. Place cover assembly, part #CCBBSCTCAL on top the floor box. Use
1/4-20 x 1" long bolts to secure to floor box enclosure.
6-GANG MOUNTING BRACKETS USED WITH SECTIONAL DEVICE PLATES
Cat. No. RFB119-SPACER
Used to close gap between standard
single and multi-gang plates
(6) 1-Gang Sectional Plates
1 13/16" x 4 1/2"
[46mm x 114mm]
Existing opening when not covered
with Cat. No. RFB119-SPACER
Cat. No. RFB119-SPACER
12. Determine blanking plates and spacers based on typical layouts illustrated below.
6-GANG MOUNTING BRACKETS USED WITH STANDARD DEVICE PLATES
3-Gang Standard Plate
6 3/8" x 4 1/2"
[162mm x 114mm]
1-Gang Standard Plate
2 3/4" x 4 1/2"
[70mm x 114mm]
Cat. No. RFB119-SB
Single-gang Sectional Blank Plate
(mounted off-center)
Cat. No. RFB119-SPACER
Used to close gap between
standard single and multi-
gang plates
2-Gang Standard Plate
4 9/16" x 4 1/2"
[116mm x 114mm]
Cat. No. RFB119-SPACER
3-Gang Standard Plate
6 3/8" x 4 1/2"
[162mm x 114mm]
Wiremold
U.S. and International:
60 Woodlawn Street • West Hartford, CT 06110
1-800-621-0049 • FAX 860-232-2062 • Outside U.S.: 860-233-6251
Canada:
570 Applewood Crescent • Vaughan, Ontario L4K 4B4
1-800-723-5175 • FAX 905-738-9721
1 009 489R2 0512
© Copyright 2012 Legrand/Wiremold All Rights Reserved