Legrand Evolution Series Floor Box 50A Adapter Kit - Manual (Page 2)

Step 1. The EFB-50A Adapter will only work with the
plastic tunnel (EFB810-TUN). If you have the metal
tunnel (EFB810S-TUN), you will need to order the
plastic tunnel (EFB810-TUN).
Step 3. Remove the tunnel, mounting bracket, divider, end
cap closest to the tunnel, and extra divider screws.
Step 4. Install the 50A receptacle (sold separately) to the
50A adapter base.
NOTE: Use two (2) hex nuts (included) to secure
receptacle in place.
Tunnel
Mounting Bracket
Divider
End Cap
Module Back Plate
Receptacle
NOTE: Adapter is designed for 50A devices only.
Step 2. The EFB-50A Adapter is directional and can only
be used on the side shown.
EFB810S-TUN
Metal Tunnel
EFB810-TUN
Plastic Tunnel
NOTE: 50A Device will be pointed at the tunnel
(EFB810-TUN).