Legrand RC7AFFTC - Manual (Page 2)

Replace
RC7FF114TCLJB Poke-Thru
(Applies to installations in the City of Chicago or other locations where local codes
require the use of EMT compression fittings, and a junction box suitable for use in
environmental air spaces.)
Once unit is pushed into the Cored Hole,
from below, install an EMT Compression
Fitting (not supplied) and Junction Box (not
supplied) to the Conduit System. Complete
installation per NEC and Local Codes.
Step 5 With assembly installed, remove screw plugs
and install conduit adapters as necessary.
Step 6 Completed assembly.
Step 7. Follow steps 1 through 6 for installation.