Danby DWM99W - Manual (Page 4)

3
SAFETY INSTRUCTIONS CONTINUED
21. Always follow the fabric care instructions
supplied by the garment manufacturer.
22. Never operate the washer with any guards
and/or panels removed.
23. DO NOT operate the washer with broken or
missing parts.
24. DO NOT by-pass any safety devices.
25. Failure to install, maintain, and/or operate this
machine according to these instructions may
result in conditions which can produce bodily
injury and/or property damage.
NOTE:
The WARNING AND IMPORTANT SAFETY
INSTRUCTIONS appearing in this manual are
not meant to cover all possible conditions and
situations that may occur. It must be understood
that common sense, caution and carefulness
are factors which CANNOT be built into the
washer. These factors MUST BE supplied by
the person(s) installing, maintaining, or
operating the washer.
Always contact your dealer, distributor, service
agent or the manufacturer about any problems or
conditions you do not understand.
INSTALLATION INSTRUCTIONS
BEFORE YOU START
Tools
For most installations, the basic tools that you
will need are:
Electrical
The washer needs a 120 V~/60 Hz, polarized three
slot effectively grounded receptacle. For more
detailed information refer to the Section on
Electrical Requirements
Water
The washer needs standard 3/4 inch water supply
faucets with a pressure between 0.02 MPa and .08
MPa. For more detailed information refer to the
Water Supply Requirements
Specifications
1. Rated Voltage 120V~
2. Rated Frequency 60Hz
3. Rated Current 2.5A
4. Max Washing capacity
and Spin dry capacity 4.0 kg
5. Enter water pressure 0.02 MPa ~ 0.8 MPa
6. Net weight 36kg
7. Size(D X W X H) 545mm x 550mm x 890mm
Wrench Pliers
Screwdriver