Quad receptacle cover – Legrand WKD Pro Series Round Flush Cover Plates User Manual

Page 2

Advertising
background image

COMMUNICATION DEVICES:

QUAD RECEPTACLE INSTALLATION:

(2" [51mm] min. preset depth)

1. Pull conductors through the adapter plate and wire to the receptacle leads.

2. Line up the receptacle strap with the notches in the adapter plate and

secure with (2) #6-32 flat head screws.

QUAD RECEPTACLE COVER:

1. Attach trim flange to cover adapter and receptacle strap using (2)

#6-32 flat head screws.

2. Align gasket over receptacle and press bead into flange.

3. Attach slide cover with (2) #6-32 pan head cover screws.

4. Apply icon on receptacle slide if wired for isolated ground circuit.

#6-32 Flat

Head Screw

#6-32 Pan

Head Screw

Slide Cover

Step 4

#6-32 Flat

Head Screw

CAUTION: Receptacle mounting means not grounded. Grounding

wire connection required. For isolated ground wiring,
connect ground leads to a separate isolated grounding
conductor. See NEC 250-146(d).

CAUTION:

Gasket must be in place to provide
scrub water seal.

CAUTION:

Do not over tighten cover screws.

CONVENTIONAL WIRING SCHEMATIC

ISOLATED GROUND WIRING SCHEMATIC

BLACK or HOT

BLACK

BLACK or HOT

BLACK

From branch circuit

from receptacle

From branch circuit

from receptacle

WHITE or NEUTRAL

WHITE

WHITE or NEUTRAL

WHITE

From branch circuit

from receptacle

From branch circuit

from receptacle

GREEN or GROUND

GREEN

GREEN or GROUND

GREEN

From branch circuit

from receptacle

From branch circuit

from receptacle

System Ground

NOTE: Place orange triangle on devices that are wired for

isolated ground. See NEC 250-146 (d).

Gasket

Point Keystone Tab
Away From Bezel.

TracJack Blank
(supplied)

Foam Plug
(supplied)

TracJack
(sold separately)

Ortronics Series II Bezel and Communication
Jack (Series II Bezel Included; Series II
Modular Inserts sold separately)

Communication Jack (sold separately)

Ortronics TracJack Bezel and
Communication Jack (TracJack
Modular Inserts sold separately)

Point Keystone Tab
Away From Bezel.

Lower Level Bezel Installation (Typical for Fiber
Installations) (Fiber Jack sold separately)

Pass & Seymour ACTIVATE
Bezel and Communication Jack

Advertising