Legrand ALDS4000 Designer Series Large Raceway Base - Manual (Page 2)

Wire Clip Installation – Additional Wire Clips are provided for the upper Channel of the Raceway.
ALDS4000C COVER INSTALLATION:
Step 1. Step 2.
ALDS4000C COVER REMOVAL:
Hook
Rotate Clip and snap into place. Wire Ties can be added if desired.
Hook Cover into Base Section. Installation Complete.
Slide a 2" [51mm] or wider metal Putty Knife into the
Seam between Covers. The Covers will break free
from the Base. Slide the Putty Knife along the section
of Cover until it unsnaps completely.
Snap Cover into place to complete installation.