Legrand ALDS4000 Designer Series Large Raceway Activation - Manual (Page 2)

Step 1. Pull Wires through opening in Device Plate and snap
Device Plate to Raceway Base.
Step 2. Pull Wires through the Device Bracket and
wire Receptacle.
Step 3. Use Screws provided to screw through
the Receptacle and Device Bracket into
threaded holes in Device Plate.
Step 4. Standard Faceplates (not provided)
complete the installation.
ALDS4047-2A: No Bracket required. Bezel
(included) can hold up to two
communications ports.
ALDS4047MAB: Bezel (included) can hold up to six
communications ports.
TO MOUNT ALDS4047C: