Legrand V4010D Entrance End Fitting - Manual (Page 2)

G/V4015 Tee
G/V4015D Divided Tee
Installation Instructions
G/V4015
For G/V4000 T-branch run on same surface: Tee is
inserted in G/V4000 Base and Couplings*, are
positioned at base joints and secured. G/V4015
cover is centered over tee and attached. G/V4000
covers are then butted to cover and secured.
G/V4015D
For divided G/V4000 T-branch run on same sur-
face: Follow procedure for G/V4015 with the excep-
tion of removing the divider compartment cover
and inserting wire prior to assembling cover on
raceway.
*Couplings G4001 available separately
©1996 The Wiremold Company • West Hartford, CT 06133-2500
AWG 14 12 10 8 6 4 3 2
THWN, THHN
T90 NYLON
74 55 35 17 12 7 6 5
RECOMMENDED WIRE FILL CAPACITY
FOR G/V4015D DIVIDED TEE
Refer to catalog for additional
wire capacities with devices installed.
Telephone Cable 25-Pair 50-Pair 75-Pair 100-Pair
No. of Cables 4 2 1 1
Shielded
Coaxial Cable Twinaxial Data Cable IBM ® Cabling System
Type 1P Type 2P Type 9P
RG-6/U RG-58 A/U RG-59/U RG-62 A/U 100 14 cond. Type 1 Plenum Type 2 Plenum Type 6 Plenum
.242 O.D. .195 O.D. .242 O.D. 260 O.D. .330 O.D. .300 O.D. .430 O.D. .400 O.D. .510 O.D. .510 O.D. .330 O.D. .225 O.D.
Dual
Compartment
9 14 9 9 4 7 9 6 2 4 4 9
w/divider
COMMUNICATIONS AND WIRING
G4015
See reverse side for installation instructions for G/V4015D.